Headphones and earphones are our daily companions, we can listen to our favorite tunes with them wherever we are. To make sure they last longer and maintain the same performance, we need to make sure we take care of them, and clean them from time to time. This can get complicated especially when it comes to in-ear earphones and despite its benefits, little is written about the proper way to do it. So how do you do it the right way? Read on, as we tell you what to do.
How do our headphones get dirty in the first place?
It doesn’t matter if it’s headphones or earphones, both can get a little dirty, Sadly, many of us are aware of the common issue of earwax in-ears, which can turn into a hub for bacteria and other dirt. With over-ears, its less earwax, and more about the dangers of summer sweats.
They can turn into real dirt centers once we’ve used our favorite audio headwear. And the following are not only ugly, but also unhygienic, they have a chance to make Less comfortable to wear and can also reduce sound quality, In the worst case, the in-ear may stop working completely. That’s why it’s important to clean them frequently.
What’s the best way to clean different headphones/earphones?
Cleaning requirements for different types of headphones and earphones
Especially with expensive and high quality headphones, it is extremely annoying if they break or wear out due to dirt. In terms of cleanliness, the requirements are roughly the same for each type of headphone. In any case, do not use running water near the technology and avoid aggressive chemicals as they can damage the material. Both can be extremely counterproductive. This applies to all types of headphone builds and even waterproof headphones. Not even their technology affords you to put them under a single tap.
A dry, clean cloth, cotton swabs or toothpicks, cool air from a hairdryer, or simply blowing, may used as a cleaning aid, You can use lukewarm water with or without soap, for example, you remove and clean the G’s soft silicone attachment of in-ear headphones without water coming into contact with electronic components. The exact cleaning process depends on the type of headphones used, ie whether they are in-ear or on/over-ear headphones (clip-on headphones).
Teufel. fitting products from
how to clean ear
Because fast dirt In-ear headphones are also available to manufacturers, supplied with replacement attachments and also offered for sale individually. However, if you don’t want to buy new attachments regularly, you can just carefully clean the in-ear headphones yourself.
To do this, you delete the attachmentFor example, rubber or silicone earbuds with no technology, which are most likely to be covered by earwax. These should be cleaned with soap and water. Stubborn dirt can be easily removed with cotton or a toothpick. Be careful not to damage the material. Expensive headphones often come with special cleaning agents; Of course, you can use these without fear of damaging the material. Then the earphones themselves are carefully cleaned with a dry cloth and without water or soap/chemicals.
A slightly damp cloth is fine too. If even the finer pores of the grid are clogged, you can try blowing away the dirt. otherwise, a A hairdryer on a cold setting can help, If that also doesn’t help, you can stick a piece of adhesive tape firmly in place and try to remove the dirt with the tape. When everything is clean and especially the attachments are dry, you can put them back together.
So cleaning in-ear headphones isn’t as complicated as it sounds. by the way, to prevent contaminationYou can also carefully wipe the headphones with a clean anti-back wiper after each use and directly remove visible dirt.
It’s even easier, as shown in the following video:
The cleaning of bow-shaped headphones, whether the shell is over the ears or over the ears, is basically the same as for earphones. In many models, Ear cups or pads can be removed and then cleaned, Otherwise, you can carefully clean the headphones with a dry or only slightly dampened cloth. The advantage of clip-on headphones is that a large amount of earwax is eliminated.
In-ear headphones come in direct contact with the ear, Bow headphones never or rarely come into contact. So they are generally easier to clean; Soap and water are usually not necessary. If you’re able to remove the ear cups or at least the pads and get them wet, they should be completely dry, like in-ear attachments, before reattaching them to the bow with technology. as already mentioned, This point also applies to waterproof headphones, You can also refer to the manual to see how to clean your headphones properly. Remember that if you’ve lost your manual, a simple Google search can fix it.
Teufel. streaming solutions from
Iradio 3 sixty: With our compact digital radio you can get all the stations and stream them however you want. Wherever you place it, you will always have the best surround sound experience.
Itufel one m:Small but Powerful: The speaker offers you a complete sound through WLAN and Bluetooth. A 3-way stereo system with an integrated subwoofer, 7 speakers and passive membrane guarantees room-filling sound quality.
More Headphones from Teufel:
Conclusion: Cleaning Tips at a Glance
- The cleaning of a headband and in-ear headphones is the same.
- In-ear models are more likely to get dirty with earwax, which is why attachments tend to be damp and cleaned with cleaning agents.
- Electronics generally should not come into contact with water.
With the help of these tips, you can easily clean your headphones. what experiences have you had and What tips do you have yourself? – Tell us in the comments,